- Check that the cradle has a current LOLER thorough examination certificate.
- Wear a full harness clipped to the independent safety line at all times.
- Complete a pre-use inspection of wire ropes, hoists, and platform fixings.
- Know the emergency lowering procedure before ascending in the cradle.
- Check wind conditions and do not use the cradle above the stated limit.
- Verify the platform load does not exceed the safe working load.
- Ensure roof-level davits or outriggers are correctly installed and secured.
- Keep tools and materials secured to prevent them falling from the platform.
- Report any unusual noises, vibrations, or movement in the wire ropes.
- Barricade the area below the cradle to protect people from falling objects.
|
- DON'T use a suspended platform without a valid examination certificate.
- DON'T work from a cradle without a harness on an independent line.
- DON'T overload the platform beyond the stated safe working load.
- DON'T operate the cradle in wind speeds above the manufacturer's limits.
- DON'T climb on the cradle guardrails or stand on the mid-rail.
- DON'T attempt to bridge between the cradle and the building facade.
- DON'T leave tools or materials unsecured on the platform at any time.
- DON'T use a cradle without first confirming the emergency rescue plan.
- DON'T modify or alter the cradle suspension system without approval.
- DON'T allow untrained personnel to operate the cradle hoist controls.
See also: Temporary Access Safety Awareness | Harness and Lanyard Use
|