DC Electrical Safety (Solar)

Toolbox Talk Record

Ref: TBT-ENE-007  |  Issue: 1  |  Date: March 2026
PresenterProject
LocationDate

What?

Why?

Cannot be switched offSolar panels generate electricity in any daylight, including overcast conditions. There is no off switch for the DC source.
Fatal shock riskString voltages exceeding 1,000V DC cause lethal electrocution. DC shock is harder to release from than AC shock.
Fire hazardDC arc faults sustain higher temperatures than AC arcs and are harder to extinguish, creating serious fire ignition risk.
Legal dutyThe Electricity at Work Regulations 1989 require that work on or near DC solar systems follows safe isolation procedures.
Do Don't
  • Treat all solar DC cabling as live during daylight hours at all times.
  • Use DC-rated isolation switches, fuses, and test equipment only.
  • Wear insulated gloves and use insulated tools for all DC work.
  • Cover panels with opaque material to reduce voltage before DC work.
  • Test for voltage using a DC-rated meter before touching any conductor.
  • Ensure all DC connectors are properly mated and locked into position.
  • Label all DC cabling and junction boxes clearly with voltage warnings.
  • Follow the system-specific safe isolation procedure for each solar array.
  • Report any damaged cables, connectors, or panels immediately for repair.
  • Know the location of DC isolators and emergency shutdown procedures.
  • DON'T assume solar panels are safe to touch because it is cloudy.
  • DON'T use AC-rated switches, fuses, or test equipment on DC circuits.
  • DON'T disconnect DC connectors under load; this creates a sustained arc.
  • DON'T touch exposed cable ends or damaged connectors on solar arrays.
  • DON'T work on solar DC circuits without specific DC safety training.
  • DON'T ignore damaged insulation or cracked panels; they create live hazards.
  • DON'T assume standard AC isolation procedures apply to solar DC systems.
  • DON'T work on rooftop solar panels without fall protection in place.
  • DON'T store conductive tools or materials on top of solar panel arrays.
  • DON'T attempt to fight a fire on solar panels without specialist advice.

See also: Ground Mounted Solar Farm Safety | Rooftop Solar PV Installation
ebrora.com