The Lifting Operations and Lifting Equipment Regulations 1998 require that all lifting equipment and accessories undergo thorough examination at specified intervals. Without a valid thorough examination certificate, lifting equipment must not be used. This legal requirement protects workers from equipment failure, structural collapse, and dropped loads. This talk explains when examinations are required and what they involve.
Key Hazards
Equipment failure from undetected defects causing dropped loads
Prosecution for using lifting equipment without valid examination
Structural collapse of cranes or hoists from accumulated fatigue damage
Sling or shackle failure from wear not identified during inspection
Control Measures
Ensure all lifting equipment has a valid thorough examination certificate before use.
Schedule thorough examinations at the correct intervals: 6 months for lifting accessories, 12 months for lifting equipment.
Arrange examination after installation and before first use of any new or relocated lifting equipment.
Use a competent person, typically an insurance company engineer, to carry out the examination.
Keep all examination reports on site and available for inspection by the HSE.
Act on any defects identified in the examination report before the equipment is used again.
Maintain a register of all lifting equipment and accessories with examination due dates.
Remove from service any equipment whose examination certificate has expired.
Remember
Lifting equipment must not be used without a valid thorough examination certificate
Lifting accessories such as slings and shackles must be examined every six months
Lifting equipment such as cranes and hoists must be examined at least every twelve months
Act on all defects found during examination before the equipment is used again
Keep all examination reports on site and available for HSE inspection at any time
Applicable Legislation: LOLER 1998 · PUWER 1998 · Health and Safety at Work etc. Act 1974 · ACOP L113 (Safe Use of Lifting Equipment)