Brazing and soldering copper pipework is a routine task in mechanical building services installation for heating, plumbing, and refrigeration systems. Both processes use naked flames from gas torches in proximity to combustible building materials. Fume inhalation from flux and filler metals adds a health risk. This talk covers the fire prevention and health controls for brazing and soldering copper pipe on UK construction sites.
Key Hazards
Fire from torch flame igniting nearby timber, insulation, or cables
Fume inhalation from flux and silver-bearing brazing alloys
Burns from handling recently brazed joints and heated pipe sections
LPG cylinder leaks or flashback from faulty torch equipment
Control Measures
Obtain a hot works permit before brazing or soldering anywhere on site.
Clear combustible materials within a one-metre radius of the joint being heated.
Use a fire-resistant mat or blanket to shield adjacent surfaces from the torch flame.
Ensure a fire extinguisher is within arm's reach of the brazing location at all times.
Maintain a fire watch for at least 60 minutes after the last joint is completed.
Provide adequate ventilation when brazing in enclosed spaces to disperse flux fumes.
Inspect the torch, hose, regulator, and flashback arrestor before every use.
Wear heat-resistant gloves and safety glasses during all brazing and soldering operations.
Store LPG cylinders upright in a ventilated area away from the work location when not in use.
Remember
Obtain a hot works permit and maintain a fire watch for at least 60 minutes afterwards
Clear combustibles and use a fire-resistant mat to shield surfaces near the torch flame
Keep a fire extinguisher within arm's reach during all brazing and soldering work
Inspect the torch, hose, regulator, and flashback arrestor before every single use
Ensure adequate ventilation when brazing in enclosed spaces to control flux fumes