Scaffold Protection and Sheeting

Scaffold sheeting and netting protects the public from falling debris and contains dust and noise.
Sheeting significantly increases the wind load on the scaffold — additional ties and bracing are required.
Monofilament netting allows wind through while catching debris — it is less wind-loading than solid sheeting.
The scaffold design must account for the additional wind loading before sheeting is installed.
Unsecured or damaged sheeting in high winds can tear away and become a projectile hazard.
BS EN 12811 and TG20 provide guidance on scaffold sheeting and the additional loading it creates.
Scaffold sheeting adjacent to public areas is often a planning condition on construction projects.
The scaffold must be inspected after sheeting is installed and again after any high wind event.
Sheeting fixings must be secure at all points — loose sheeting flaps noisily and tears in wind.
Temporary removal of sheeting may be required during severe weather to reduce wind loading.

Wind loading	Sheeting acts as a sail — without additional ties the scaffold can collapse in wind.
Public protection	Debris netting and sheeting prevent falling objects striking the public below.
Noise control	Scaffold sheeting reduces noise impact on neighbours from construction activities.
Legal compliance	Planning conditions and H&S regulations may require sheeting adjacent to public areas.

Do

Don't

Confirm the scaffold is designed for the additional wind load before installing sheeting.
Install additional ties and bracing as specified in the scaffold design for sheeted conditions.
Secure sheeting fixings at all attachment points to prevent flapping and tearing.
Inspect the scaffold and sheeting after installation and after every high wind event.
Use monofilament netting where full sheeting wind loading cannot be accommodated.
Consider temporary sheeting removal during severe weather to reduce wind loading.
Brief the scaffolding team on the specific design requirements for sheeted scaffolds.
Monitor weather forecasts and check sheeting conditions before storms arrive.
Ensure scaffold ties are not removed or loosened when sheeting is in place.
Record sheeting installation on the scaffold register and inspection schedule.

DON'T install sheeting without confirming the scaffold is designed for the wind load.
DON'T leave sheeting partially secured — loose areas catch the wind and tear.
DON'T remove scaffold ties or bracing from a sheeted scaffold.
DON'T ignore sheeting damage — repair or replace it before the next wind event.
DON'T use solid sheeting where the scaffold design only allows netting.
DON'T leave sheeting in place during severe weather without checking loading limits.
DON'T install sheeting without the knowledge and approval of the scaffold supervisor.
DON'T assume netting provides the same weather protection as solid sheeting.
DON'T allow sheeting to block access routes, ladder bays, or fire escape points.
DON'T skip post-storm inspection of sheeted scaffolds — damage may be hidden.

See also: Scaffold Safety Awareness | Scaffold Ties and Stability

Presenter		Project
Location		Date

Toolbox Talk Record