- Position lifebuoys at maximum 50-metre intervals along all waterside work areas.
- Mark all rescue equipment locations with clear, visible signs from the working area.
- Inspect rescue equipment weekly for presence, condition, and readiness for use.
- Train all waterside workers in rescue equipment use during the site induction.
- Keep rescue equipment unobstructed and immediately accessible at all times.
- Stock replacement equipment on site to restock after any use or damage.
- Position throw bags and reaching poles alongside lifebuoys at rescue stations.
- Install rescue ladders at regular intervals along quaysides and steep banks.
- Brief the team on the nearest rescue equipment location at the start of every shift.
- Practice rescue drills so the team can deploy equipment under the stress of emergency.
|
- DON'T space rescue equipment further than 50 metres apart along waterside work areas.
- DON'T leave rescue stations without clear signs visible from the working area.
- DON'T skip weekly inspections — missing or damaged equipment costs lives.
- DON'T assume workers know how to use rescue equipment — train them at induction.
- DON'T block rescue equipment with stored materials, plant, or construction debris.
- DON'T use rescue equipment for other purposes — it must be available for emergencies.
- DON'T rely on lifebuoys alone — provide throw bags, lines, and reaching poles too.
- DON'T omit rescue ladders where steep banks prevent a person climbing out of water.
- DON'T start waterside work without confirming the nearest rescue equipment location.
- DON'T leave rescue drills unpractised — a rehearsed response is faster and saves lives.
See also: Drowning Prevention and Water Safety | Working Over Water
|