- Register for Environment Agency flood warnings for the site location.
- Prepare a site-specific flood risk assessment with trigger levels for action.
- Pre-position flood barriers, pumps, and sandbags where flooding is foreseeable.
- Evacuate excavations immediately when flood warnings are issued for the area.
- Monitor river levels and tidal forecasts daily during work near watercourses.
- Identify evacuation routes that remain passable during flood events.
- Secure plant, fuel, and chemicals above anticipated flood levels before events.
- Brief the team on flood triggers, evacuation routes, and assembly points.
- Inspect the site for contamination and structural damage before re-entering after flooding.
- Keep emergency contact numbers for the Environment Agency available on site.
|
- DON'T work in excavations during active flood warnings for the site location.
- DON'T ignore rising water levels or assume they will recede before reaching you.
- DON'T drive vehicles through flood water of unknown depth on or off site.
- DON'T store fuel, chemicals, or skips in areas at risk of inundation.
- DON'T wait for the flood to arrive before starting protective actions.
- DON'T re-enter the site after flooding without checking for structural damage.
- DON'T assume flood warnings only apply in winter; summer flash floods occur too.
- DON'T leave plant in flood zones where it could be swept into watercourses.
- DON'T block or obstruct natural drainage channels that may carry flood water.
- DON'T delay evacuation because you want to finish the task first.
See also: Flood and Extreme Weather Response | Working Near Open Water
|