- Wear a personal flotation device at all times when on or accessing the pontoon
- Check the pontoon design capacity and do not exceed the maximum permitted load
- Distribute loads evenly across the pontoon to maintain stability and freeboard
- Install edge protection on all working sides of the floating platform
- Secure the pontoon with moorings and anchors rated for the expected conditions
- Ensure the access gangway adjusts for tidal and water level changes safely
- Position rescue equipment including lifebuoys and throw lines on the pontoon
- Brief all workers on the man overboard procedure before accessing the pontoon
- Inspect the pontoon, moorings, and gangway at the start of every shift
- Monitor weather and water conditions and evacuate if conditions deteriorate
|
- DON'T board the pontoon without wearing a personal flotation device
- DON'T overload the pontoon or stack materials unevenly on one side
- DON'T use a pontoon without edge protection on all open working sides
- DON'T access the pontoon via a gangway that does not accommodate water level changes
- DON'T continue working on the pontoon during high winds, strong currents, or storms
- DON'T jump between the pontoon and the shore — always use the gangway
- DON'T secure the pontoon with inadequate moorings that cannot resist the conditions
- DON'T allow more people on the pontoon than the design permits
- DON'T leave the pontoon unmoored or unsecured when not in active use
- DON'T work alone on a pontoon without someone on shore monitoring your safety
See also: Working Over Water | Personal Flotation Device (PFD) Use
|