BLD/General/TBT-BLD-001

Building Works Safety Awareness

Building & Structural Works › General › Building Works Safety Awareness

Presenter		Project
Location		Date

Building works encompass all structural, envelope, and finishing activities on commercial, residential, and industrial projects.
Multiple trades working simultaneously in the same building create coordination challenges and overlapping hazards.
Falls from height during masonry, roofing, cladding, and internal finishing work are a leading cause of injury.
Manual handling of blocks, bricks, lintels, and sheet materials causes musculoskeletal injuries across building trades.
Housekeeping is critical in buildings under construction — cluttered stairwells and corridors cause slips, trips, and falls.
Fire risk increases significantly during fit-out when combustible materials and hot works are present together.
Temporary edge protection at floor edges, stairwells, and lift shafts must be maintained until permanent barriers are installed.
Noise from power tools, cutting equipment, and fixing tools requires hearing protection in enclosed building spaces.
Working in occupied or partially occupied buildings requires additional controls to protect residents, staff, and visitors.
The construction phase plan must address the specific risks of each building phase from substructure to handover.

Prevent falls	Unprotected edges, open stairwells, and lift shafts cause fatal falls during building construction — edge protection saves lives.
Multi-trade coordination	Multiple trades in the same space creates conflicting hazards — good planning and communication prevents incidents.
Fire prevention	Buildings under construction with exposed timber, insulation, and hot works present extreme fire risk without proper controls.

Don't

Maintain edge protection at all open floor edges, stairwells, and lift shafts throughout construction.
Coordinate with other trades working in the same area to prevent conflicting activities.
Keep stairwells, corridors, and access routes clear of materials and debris at all times.
Use mechanical aids for handling heavy building materials such as blocks and lintels.
Wear hearing protection when using power tools in enclosed spaces within the building.
Follow the site fire plan — know your escape route and assembly point at all times.
Ensure adequate lighting in stairwells, corridors, and internal work areas.
Store combustible materials away from hot works locations and ignition sources.
Follow specific controls when working in occupied or partially occupied buildings.
Attend daily briefings to understand the work activities and hazards in your area.

DON'T remove edge protection from floor edges, stairwells, or lift shafts without authorisation.
DON'T start work in an area occupied by another trade without coordinating with them.
DON'T block stairwells or corridors with materials — they are your emergency escape route.
DON'T manually lift heavy building materials when a mechanical aid is available.
DON'T use power tools in enclosed spaces without wearing the required hearing protection.
DON'T ignore fire precautions — construction fires spread rapidly through unfinished buildings.
DON'T work in poorly lit areas — request temporary lighting before starting the task.
DON'T store flammable materials near hot works or temporary heating equipment.
DON'T interfere with occupied areas without the specific controls required by the plan.
DON'T skip daily briefings — building site hazards change constantly as work progresses.

See also: Structural Frame Sequence & Stability | Working in Occupied Buildings

Generate professional Risk Assessment and Method Statements in minutes. 10 document formats, site-specific content, instant Word download.

Toolbox Talk Record