CSP/Specific Spaces/TBT-CSP-013

Pipe and Culvert Entry

Confined Spaces › Specific Spaces › Pipe and Culvert Entry

Presenter		Project
Location		Date

Entry into pipes and culverts is a confined space operation under the Confined Spaces Regulations 1997.
Pipes and culverts restrict movement severely — crawling or stooping is often the only way to progress.
Atmospheric hazards include oxygen depletion, methane, hydrogen sulphide, and carbon dioxide accumulation.
Water levels in culverts can rise rapidly during rainfall upstream, flooding the space without warning.
Rescue from a long pipe or culvert is extremely difficult due to the restricted diameter and distance.
A standby person must be stationed at the entry point with communication to the entrant at all times.
Forced ventilation using flexible ducting must supply fresh air to the furthest point of entry.
The entrant should wear a harness with a retrieval line where the pipe geometry allows it.
Lighting must be intrinsically safe where flammable gas may be present in the pipe or culvert.
The distance an entrant may travel from the entry point must be defined and limited by the rescue plan.

Extreme confinement	Pipes and culverts offer the most restricted confined spaces — movement, rescue, and ventilation are severely limited.
Flooding risk	Upstream rainfall can flood a culvert in minutes, trapping and drowning anyone inside.
Rescue difficulty	Extracting a casualty from a narrow pipe over a long distance is one of the most challenging rescue scenarios.

Don't

Obtain a confined space entry permit before anyone enters a pipe or culvert
Monitor the atmosphere continuously for oxygen, flammable, and toxic gases
Check weather forecasts and upstream catchment conditions before culvert entry
Provide forced ventilation with flexible ducting to the furthest point of penetration
Station a standby person at the entry with continuous communication to the entrant
Attach a retrieval line to the entrant where the pipe diameter allows it
Define the maximum penetration distance based on the rescue plan capabilities
Use intrinsically safe lighting and equipment inside the pipe or culvert
Brief the entrant on the specific hazards, communication signals, and escape procedure
Have a trained rescue team on standby with appropriate equipment before entry begins

DON'T enter any pipe or culvert without a confined space permit and rescue plan
DON'T enter a culvert during or after heavy rainfall without confirming it is safe
DON'T travel further into a pipe than the rescue plan can recover you from
DON'T rely on natural ventilation in a long pipe — forced air supply is essential
DON'T enter without a standby person maintaining continuous communication at the portal
DON'T ignore gas monitor alarms — exit immediately using the planned withdrawal route
DON'T use non-intrinsically safe electrical equipment where flammable gas may be present
DON'T attempt to enter pipes where the diameter does not allow safe movement or rescue
DON'T remove the retrieval line harness because it is uncomfortable in the confined space
DON'T enter to rescue a casualty without breathing apparatus and a coordinated rescue team

See also: Confined Space Entry Procedures | Emergency Rescue Plans

Generate professional Risk Assessment and Method Statements in minutes. 10 document formats, site-specific content, instant Word download.

Toolbox Talk Record