ENE/Wind/TBT-ENE-017

Wind Turbine Rescue Procedures

Energy & RenewablesWindWind Turbine Rescue Procedures

All Categories/Energy & Renewables/Wind/Wind Turbine Rescue Procedures

Wind Turbine Rescue Procedures

Toolbox Talk Record

Ref: TBT-ENE-017  |  Issue: 1  |  Date: March 2026
PresenterProject
LocationDate

What?

  • Wind turbine rescue involves recovering incapacitated workers from nacelles, towers, and hubs at extreme height.
  • Standard emergency services cannot easily reach workers at nacelle height, typically 80 to 150 metres above ground.
  • GWO (Global Wind Organisation) rescue training is mandatory for all personnel who work at height on wind turbines.
  • Rescue plans must cover casualty lowering, self-rescue, buddy rescue, and helicopter evacuation scenarios.
  • Suspension trauma can develop within minutes when an unconscious worker hangs in a harness after a fall.
  • Rescue equipment including descenders, stretchers, hauling systems, and first aid must be available at nacelle level.
  • Communication between the rescue team at height and ground-level support is critical throughout the operation.
  • Practice rescue drills must be carried out regularly so the team can perform under stress when needed.
  • Weather conditions at turbine height can prevent or complicate rescue attempts significantly.
  • The Work at Height Regulations 2005 require a rescue plan before any person works at height on a turbine.

Why?

Time criticalSuspension trauma kills within 20 minutes — rescue from turbine height must be fast and pre-planned.
Inaccessible locationEmergency services cannot reach nacelle height quickly — the on-site team must perform the initial rescue.
Legal requirementThe Work at Height Regulations 2005 require a rescue plan before any work at height begins.
Do Don't
  • Ensure all turbine workers hold valid GWO rescue training before accessing any turbine
  • Position rescue equipment including descenders and a stretcher at nacelle level before work
  • Practise rescue drills regularly so the team can perform effectively under real conditions
  • Brief the rescue plan to all team members before ascending the turbine each shift
  • Maintain radio communication between the nacelle team and ground support at all times
  • Lower an unconscious casualty from a harness quickly to prevent suspension trauma
  • Check weather conditions before attempting any rescue — wind may prevent safe descent
  • Call emergency services immediately even if on-site rescue begins without delay
  • Carry a first aid kit including trauma dressings to the nacelle for every work session
  • Record and review every rescue drill to identify improvements for future emergencies
  • DON'T work at turbine height without a rescue plan briefed to every team member
  • DON'T leave rescue equipment on the ground — it must be at working height in the nacelle
  • DON'T delay lowering an unconscious casualty from a harness — suspension trauma is fatal
  • DON'T attempt rescue in conditions where the rescuer would also be at serious risk
  • DON'T assume emergency services can reach the nacelle — plan for on-site rescue first
  • DON'T skip rescue drills because the team is experienced — practice maintains competence
  • DON'T ascend the turbine without confirmed communication between nacelle and ground teams
  • DON'T use damaged or uninspected rescue equipment — check before every deployment
  • DON'T leave a rescued casualty lying flat if suspension trauma is suspected — raise legs
  • DON'T treat rescue planning as optional — it is a legal requirement for work at height

See also: Working at Height on Wind Turbines | Rescue Plan Requirements

RAMS Builder

Generate professional Risk Assessment and Method Statements in minutes. 10 document formats, site-specific content, instant Word download.

Learn More