NIG/Specific/TBT-NIG-009

Night Emergency Response

Night WorkingSpecificNight Emergency Response

All Categories/Night Working/Specific/Night Emergency Response

Night Emergency Response

Toolbox Talk Record

Ref: TBT-NIG-009  |  Issue: 1  |  Date: March 2026
PresenterProject
LocationDate

What?

  • Emergency response at night is more difficult due to reduced visibility, fewer personnel, and fatigue.
  • Emergency services take longer to locate incidents on construction sites at night without clear directions.
  • Muster points and escape routes must be illuminated and clearly signed for night shift workers.
  • Fewer first aiders and fire wardens are typically present on night shifts compared to daytime operations.
  • Communication failures at night delay emergency notification when radios fail or personnel are spread out.
  • Night workers may be unfamiliar with the site layout if they do not normally work the night shift.
  • Power failures at night plunge the entire site into darkness, making evacuation extremely hazardous.
  • A site-specific night emergency plan must cover fire, medical, structural collapse, and security incidents.
  • Emergency lighting along escape routes and at muster points must be tested and maintained for night work.
  • CDM 2015 requires that emergency procedures are effective for all work periods including night shifts.

Why?

Delayed responseReduced visibility and fewer staff at night delay incident detection, alarm raising, and emergency response.
Navigation difficultyWorkers and emergency services struggle to navigate the site in darkness, losing critical minutes during emergencies.
Legal dutyCDM 2015 requires emergency procedures that work effectively at night, not just during daytime hours.
Do Don't
  • Brief all night workers on the emergency plan, escape routes, and muster points.
  • Ensure emergency lighting is working on all escape routes and at assembly points.
  • Provide clear directions and a site map to emergency services responding at night.
  • Appoint sufficient first aiders and fire wardens for the night shift team size.
  • Test communication systems including radios and alarms before each night shift.
  • Carry a personal torch as backup in case of site-wide power failure.
  • Practise night emergency drills so the team knows the procedures in darkness.
  • Keep emergency access routes clear and well-lit for emergency vehicle approach.
  • Post the emergency contact numbers at the site entrance and in welfare units.
  • Ensure the night shift supervisor has authority to activate the full emergency plan.
  • DON'T assume daytime emergency procedures work the same at night.
  • DON'T reduce first aid or fire warden cover below safe levels for night shifts.
  • DON'T leave escape routes unlit or blocked during night working operations.
  • DON'T skip the pre-shift communication system test for night operations.
  • DON'T rely on memory for escape routes at night; use illuminated signage.
  • DON'T allow night workers to start without a briefing on emergency procedures.
  • DON'T leave the site entrance locked or unsigned for emergency service access.
  • DON'T assume a power failure will be short; activate the emergency plan immediately.
  • DON'T cancel night emergency drills because they disrupt the work programme.
  • DON'T leave the night shift without a supervisor who can coordinate emergency response.

See also: Night Working Safety Awareness | Emergency Plan Awareness

RAMS Builder

Generate professional Risk Assessment and Method Statements in minutes. 10 document formats, site-specific content, instant Word download.

Learn More