TUN/Specific/TBT-TUN-012

Tunnel Surveying and Monitoring

Tunnelling & Shafts › Specific › Tunnel Surveying and Monitoring

Presenter		Project
Location		Date

Tunnel surveying provides alignment, profile, and deformation data essential for safe and accurate construction.
Surveyors work in the confined tunnel environment alongside TBM operations, muck trains, and segment erection.
Monitoring instruments including convergence pins, extensometers, and prisms track ground and lining movement.
Working near the TBM face exposes surveyors to noise, dust, vibration, and moving machinery hazards.
Instrument installation on the tunnel crown requires working at height within the confined bore.
Laser and total station instruments must be used with awareness of eye safety in the enclosed space.
Emergency evacuation from the tunnel heading may require travelling hundreds of metres to the portal.
Communication between the survey team and the TBM operator prevents interference with construction activities.
Survey data accuracy is critical — alignment errors accumulate over the tunnel drive length.
All tunnel workers including surveyors must carry personal gas monitors and self-rescuers.

Confined environment	Surveyors share the confined tunnel space with heavy plant, creating noise, dust, and collision hazards.
Data accuracy	Survey errors in tunnel alignment can result in structural problems and costly corrections at breakthrough.
Emergency response	Distance from the portal makes tunnel evacuation slow — surveyors must know the escape procedure.

Don't

Carry a personal gas monitor and self-rescuer at all times in the tunnel
Coordinate survey activities with the TBM operator to avoid plant movement conflicts
Use safe working platforms for installing monitoring instruments at crown level
Wear hearing protection throughout all survey activities in the tunnel heading
Know the emergency evacuation route and location of refuge chambers before entering
Protect survey instruments from damage by construction activities and water spray
Ensure laser instruments comply with eye safety requirements in the enclosed tunnel
Check ventilation is operating before entering the tunnel heading for survey work
Record all survey and monitoring data accurately for the project quality records
Brief the survey team on the specific tunnel hazards before each shift underground

DON'T enter the tunnel without a personal gas monitor and self-rescuer
DON'T set up survey instruments in the path of TBM operations or muck trains
DON'T climb the tunnel lining to install monitoring points without fall protection
DON'T direct laser beams towards other workers' eyes in the confined tunnel space
DON'T work in the tunnel heading without confirming ventilation is operational
DON'T ignore gas monitor alarms — evacuate using the planned escape route
DON'T leave survey equipment where it could be damaged by construction plant
DON'T accept inaccurate survey data — errors compound over the drive length
DON'T work alone in the tunnel heading without communication with the surface team
DON'T block emergency escape routes with survey equipment or instrument cases

See also: Tunnelling Safety Awareness | Emergency Evacuation From Tunnels

Generate professional Risk Assessment and Method Statements in minutes. 10 document formats, site-specific content, instant Word download.

Toolbox Talk Record