WWT/General/TBT-WWT-001

Wastewater Treatment Works Safety Awareness

Water & Wastewater Treatment › General › Wastewater Treatment Works Safety Awareness

Presenter		Project
Location		Date

Wastewater treatment works present unique hazards including toxic gases, biological risks, and drowning in process tanks.
Hydrogen sulphide gas is present at many treatment works — it is heavier than air, toxic, and deadens the sense of smell.
Biological hazards from raw sewage include leptospirosis, hepatitis, and gastroenteritis from bacterial and viral contamination.
Process tanks, channels, and wet wells contain deep water with no visible means of escape if a person falls in.
Confined space entry procedures apply to many areas on treatment works including tanks, chambers, and enclosed structures.
Chemical dosing areas use corrosive and toxic substances that require specific COSHH controls and emergency procedures.
Rotating equipment such as pumps, screens, and scrapers can trap, entangle, and amputate if not properly isolated.
Treatment works are often operational during construction — live process areas must be respected and separated from work zones.
The smell of a treatment works can mask dangerous gas concentrations — always rely on gas monitors, not your nose.
All workers on treatment works must receive a site-specific induction covering the unique hazards of that particular facility.

Prevent drowning	Deep tanks with sheer walls and no handholds are a drowning hazard — edge protection and PFDs save lives.
Toxic gas risk	Hydrogen sulphide kills rapidly and deadens your sense of smell — you cannot detect dangerous levels without a gas monitor.
Biological exposure	Contact with raw sewage causes serious illness — hygiene measures and vaccination protect your health.

Don't

Attend the site-specific induction covering all hazards at this treatment works.
Carry and monitor a personal gas detector at all times on the treatment works.
Maintain edge protection around all open tanks, channels, and wet wells.
Wear PFDs when working within two metres of open water or process tanks.
Follow LOTO procedures before working near any rotating or mechanical equipment.
Wash hands thoroughly with antibacterial soap before eating, drinking, or smoking.
Cover all cuts and wounds with waterproof plasters before starting work.
Follow confined space entry procedures for all tanks, chambers, and enclosed areas.
Know the location of emergency showers, eyewash stations, and rescue equipment.
Report any feeling of illness, nausea, or skin irritation to your supervisor immediately.

DON'T enter treatment works areas without completing the site-specific induction.
DON'T rely on your sense of smell to detect gas — hydrogen sulphide deadens it rapidly.
DON'T remove or bypass edge protection around tanks, channels, or wet wells.
DON'T work near open water without a personal flotation device as required.
DON'T approach rotating equipment until it is confirmed isolated and locked out.
DON'T eat, drink, or smoke without washing hands with antibacterial soap first.
DON'T enter treatment works with open, uncovered cuts or wounds on your skin.
DON'T enter any enclosed space on a treatment works without a confined space permit.
DON'T ignore gas monitor alarms — evacuate the area immediately and report.
DON'T assume treatment works are clean environments — biological hazards are everywhere.

See also: Hydrogen Sulphide (H2S) on WwTW | Process Safety on Treatment Works

Generate professional Risk Assessment and Method Statements in minutes. 10 document formats, site-specific content, instant Word download.

Toolbox Talk Record